Back to Blog

LED Address Sign Transformers: Why 12V Matters for Safety

Why is a transformer needed?

LED address signs run on low voltage (12V), but the electrical grid supplies 230V alternating current. The transformer (power supply unit) performs this conversion – it steps 230V down to a safe 12V direct current required by the LED modules. Without a transformer, the sign cannot be connected to the mains.

Safety outdoors

Address signs are mounted outdoors, where they are exposed to moisture, rain and temperature changes. Using 12V low voltage reduces electrical risk, which is especially important in damp conditions. The power supplies we use are sealed and comply with protection standards.

How does the lighting work?

The 12V current from the transformer's output powers the LED modules located behind or inside the sign. The LEDs illuminate evenly, and depending on the construction, their diffused light creates a direct or halo effect on the wall. LED technology ensures longevity – the diodes last tens of thousands of hours.

Interaction between the dusk sensor and the transformer

If the sign has a dusk sensor, it is usually installed between the transformer and the LED modules. The sensor monitors ambient light and only lets current through to the LEDs after dusk – so the lighting turns on automatically. The transformer runs continuously, but the energy-saving sensor ensures the light only burns when needed.

Installation tips

We recommend mounting the transformer in a safe location protected from direct precipitation – for example under a canopy or in a special sealed box. The power cable should be routed so it is protected from mechanical damage. We recommend entrusting all electrical work to a qualified electrician.

transformer power supply safety 12V
Share:

Looking for modern house numbers?

Check out our latest collection of illuminated LED address signs.